View UPG2024TQ-E1-A_3181045.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1 nec's gaas mmic dpdt switches for 5 ghz ba nd wireless lan upg2024tq features ? operati ng frequency : f = 4.8 to 5.85 ghz ? low insertion loss : l ins = 1.2 db typ. @ f = 4.8 to 5.85 ghz ? handl ing power : p in (0.1 db) = +32 dbm typ. @ f = 4.8 to 5.85 ghz ? control voltage : v cont = +2.8 v/0 v typ. ? high isolation : isl (between tx and rx) = 30 db typ. @ f = 5.2 ghz isl (between ant1/ant2 and rx/tx) = 25 db typ. @ f = 5.2 ghz ? in put /output return loss : rl in /rl out = 20 db typ. @ f= 4.8 to 5.85 ghz ? switching speed : t sw = 20 ns typ. @ t rise /t fall (10/90% rf) ? high-de nsity surface mounting: 10-pin plastic tson package (2.30 2.55 0.60 mm) ? p b free description nec's upg2024tq is a gaas mmic dpdt switch for 5 ghz band wireless lan. low insertion loss and high handling power contribute to user's system design. california eastern laboratories applications ? 5 ghz band wireless lan (ieee802.11 a) data sheet part number order number package marking supplying form UPG2024TQ-E1-A UPG2024TQ-E1-A 10-pin plastic tson (pb-free) 2024 ? embossed tape 8 mm wide ? pin 5, 6 face the perforation side of the tape ? qty 3 kpcs/reel ordering information remark to order evaluation samples, contact your nearby sales of?ce. part number for sample order: upg2024tq caution observe pre cautions when handling because these devices are sensitive to electrostatic discharge.
2 upg2024tq pin connections 2024 10 9 8 7 6 1 2 3 4 5 (t op v iew) 6 7 8 9 10 5 4 3 2 1 (bottom v iew) gnd pin no. pin name 1 tx 2 v cont1 3 v cont2 4 gnd 5 rx 6 ant1 7 v cont3 8 v cont4 9 gnd 10 ant2 absolute maximum ratings ( t a = +25oc, unless otherwise specified ) parameter symbol ratings unit control voltage v cont ? 6.0 to +6.0 note 1 v input power p in +36 dbm total power dissipation p tot 0.15 note 2 w operating ambient temperature t a ? 45 to +85 c storage temperature t stg ? 65 to +150 c notes 1. within the condition of | v cont1 ? v cont2 | 6.0 v 2. mounted on double-sided copper-clad 50 50 1.6 mm epoxy glass pwb, t a = +85 c recommended op erating range ( t a = +25oc ) parameter symbol min. typ. max. unit control voltage (high) v cont (h) 2.7 2.8 3.3 v control voltage (low) v cont (l) ? 0.2 0 +0.2 v operating frequency f 4.8 ? 5.85 ghz operating ambient temperature t a ? 40 +25 +85 c
3 upg2024tq electrical characteristics (t a = +25 c, v cont = 2.8 v/0 v, z o = 50 , dc block capacitor = 2 pf, each port, on the below truth table, unless otherwise speci?ed) parameter symbol test conditions min. typ. max. unit insertion loss l ins f = 4.9 ghz ? 1.2 1.5 db f = 5.2 ghz ? 1.2 1.5 f = 5.8 ghz ? 1.5 1.7 isolation (between tx and rx) isl f = 4.9 ghz 20 25 ? db f = 5.2 ghz 25 30 ? f = 5.8 ghz 20 25 ? input return loss rl in f = 4.9 ghz 10 20 ? db f = 5.2 ghz 10 20 ? f = 5.8 ghz 7 20 ? output return loss rl out f = 4.9 ghz 10 20 ? db f = 5.2 ghz 10 20 ? f = 5.8 ghz 7 20 ? 0.1 db gain compression input power p in (0.1 db) f = 4.9 ghz 30 33 ? dbm f = 5.2 ghz 30 32 ? f = 5.8 ghz 30 32 ? switching speed t sw t rise /t fall (10/90% rf) ? 20 ? ns control current i cont ? 0.5 ? a input 3rd order intercept point iip 3 ? 50 ? dbm sta ndard characteristics for reference (t a = +25 c, v cont = 2.8 v/0 v, z o = 50 , dc block capacitor = 2 pf, each port, on the below truth table, unless otherwise speci?ed) parameter symbol test conditions min. typ. max. unit isolation (between ant1/ant2 and rx/tx) isl f = 4.9 ghz ? 22 ? db f = 5.2 ghz ? 25 ? f = 5.8 ghz ? 21 ?
4 upg2024tq test circuit 1 2 3 4 5 10 9 8 7 6 v cont 1 tx rx gnd c bypass c bypass c rf c rf v cont 2 v cont 4 ant2 ant1 gnd c bypass c bypass c rf c rf v cont 3 remark c rf : 2 pf c bypass : 1 000 pf the application circuits and their parameters are for reference only and are not intended for use in actual design-ins. truth table v cont1 v cont2 v cont3 v cont4 pass low high high low ant1-rx high low low high ant2-tx high low high low ant1-tx low high low high ant2-rx
5 upg2024tq illustration of the test circuit assembled on evaluation board . c rf c bypass c bypass c bypass c bypass c rf c rf c rf using the nec evaluation board symbol form rating part number manufacturer c rf chip capacitor 2 pf grm36ck020c50pb murata c bypass chip capacitor 1 000 pf grp033b11c102kd01e murata ? pc terminal ? a2-2pa-2.54dsa hirose ? rf connector ? 142-0721-821 johnson ? pwb ? ro4003 (t = 0.51 mm) rogers
6 upg2024tq sta ndard characteristics for reference (t a = +25 c, v cont = 2.8 v/0 v, z o = 50 , dc block capacitor = 2 pf, using test ?xture, unless otherwise speci?ed) isolation isl (db) frequency f (ghz) isolation isl (db) frequency f (ghz) insertion loss l in s (db) frequency f (ghz) insertion loss l in s (db) frequency f (ghz) 0 -0.5 -1.0 -1.5 -2.0 -2.5 -3.0 4.0 4.3 4.6 4.9 5.2 5.5 5.8 6.1 6.4 6.7 7.0 0 -0.5 -1.0 -1.5 -2.0 -2.5 -3.0 4.0 4.3 4.6 4.9 5.2 5.5 5.8 6.1 6.4 6.7 7.0 0 -0.5 -1.0 -1.5 -2.0 -2.5 -3.0 4.0 4.3 4.6 4.9 5.2 5.5 5.8 6.1 6.4 6.7 7.0 0 -0.5 -1.0 -1.5 -2.0 -2.5 -3 4.0 4.3 4.6 4.9 5.2 5.5 5.8 6.1 6.4 6.7 7.0 0 -10 -20 -30 -40 -50 4.0 4.3 4.6 4.9 5.2 5.5 5.8 6.1 6.4 6.7 7.0 0 -10 -20 -30 -40 -50 4.0 4.3 4.6 4.9 5.2 5.5 5.8 6.1 6.4 6.7 7.0 insertion loss l in s (db) frequency f (ghz) tx-ant1 inser tion loss vs. frequency (when tx-ant1 is on) ant1-rx inser tion loss vs. frequency (when ant1-rx is on) tx-ant2 inser tion loss vs. frequency (when tx-ant2 is on) ant2-rx inser tion loss vs. frequency (when ant2-rx is on) rx-tx isola tion vs. frequency (when ant2-rx is on) tx-rx isola tion vs. frequency (when tx-ant1 is on) insertion loss l in s (db) frequency f (ghz) remark the graphs indicate nominal characteristics.
7 upg2024tq input return loss rl in (db) frequency f (ghz) output return loss rl out (db) frequency f (ghz) input return loss rl in (db) frequency f (ghz) output return loss rl out (db) frequency f (ghz) 0 -10 -20 -30 -40 -50 4.0 4.3 4.6 4.9 5.2 5.5 5.8 6.1 6.4 6.7 7.0 0 -10 -20 -30 -40 -50 4.0 4.3 4.6 4.9 5.2 5.5 5.8 6.1 6.4 6.7 7.0 0 -10 -20 -30 -40 -50 4.0 4.3 4.6 4.9 5.2 5.5 5.8 6.1 6.4 6.7 7.0 0 -10 -20 -30 -40 -50 4.0 4.3 4.6 4.9 5.2 5.5 5.8 6.1 6.4 6.7 7.0 tx - ant1 input return loss vs. frequency (when tx-ant1 is on) tx - ant1 output return loss vs. frequency (when tx-ant1 is on) input return loss rl in (db) frequency f (ghz) output return loss rl out (db) frequency f (ghz) 0 -10 -20 -30 -40 -50 4.0 4.3 4.6 4.9 5.2 5.5 5.8 6.1 6.4 6.7 7.0 0 -10 -20 -30 -40 -50 4.0 4.3 4.6 4.9 5.2 5.5 5.8 6.1 6.4 6.7 7.0 tx - ant2 input return loss vs. frequency (when tx-ant2 is on) tx - ant2 output return loss vs. frequency (when tx-ant2 is on) ant1-rx input return loss vs. frequency (when ant1-rx is on) ant1-rx output return loss vs. frequency (when ant1-rx is on) remark the graphs indicate nominal characteristics.
8 upg2024tq output power p out (dbm) input power p in (dbm) 4.9 ghz output power vs. input power input return loss rl in (db) frequency f (ghz) 0 -10 -20 -30 -40 -50 4.0 4.3 4.6 4.9 5.2 5.5 5.8 6.1 6.4 6.7 7.0 ant2-rx input return loss vs. frequency (when ant2-rx is on) output return loss rl out (db) frequency f (ghz) 0 -10 -20 -30 -40 -50 4.0 4.3 4.6 4.9 5.2 5.5 5.8 6.1 6.4 6.7 7.0 ant2-rx output return loss vs. frequency (when ant2-rx is on) p in (0.1 db ) = +33.5 dbm output power p out (dbm) input power p in (dbm) 35 30 25 20 15 20 25 30 35 38 20 25 30 35 38 35 30 25 20 15 5.2 ghz output power vs. input power p in (0.1 db ) = +33.5 dbm output power p out (dbm) input power p in (dbm) 35 30 25 20 15 5.8 ghz output power vs. input power 20 25 30 35 38 p in (0.1 db ) = +33.4 dbm remark the graphs indicate nominal characteristics.
9 upg2024tq package dimensions 10-pin plastic tson (unit:mm) (bottom v iew) (0.15) (1.70) (0.30) (0.95) (0.05) (1.95) (0.30) 0.400.05 2.250.1 2.550.15 0.180.05 2.200.1 2.300.15 (0.125) (0.60 max.) remark ( ) : reference value
10 upg2024tq recommended soldering conditions this product should be soldered and mounted under the following recommended conditions. for soldering methods and conditions other than those recommended below, contact your nearby sales of?ce. soldering method soldering conditions condition symbol infrared re?ow peak temperature (package surface temperature) : 260 c or below time at peak temperature : 10 seconds or less time at temperature of 220 c or higher : 60 seconds or less preheating time at 120 to 180 c : 120 30 seconds maximum number of re?ow processes : 3 times maximum chlorine content of rosin ?ux (% mass) : 0.2%(wt.) or below ir260 wave soldering peak temperature (molten solder temperature) : 260 c or below time at peak temperature : 10 seconds or less preheating temperature (package surface temperature) : 120 c or below maximum number of ?ow processes : 1 time maximum chlorine content of rosin ?ux (% mass) : 0.2%(wt.) or below ws260 partial heating peak temperature (terminal temperature) : 350 c or below soldering time (per side of device) : 3 seconds or less maximum chlorine content of rosin ?ux (% mass) : 0.2%(wt.) or below hs350 caution do not use different soldering methods together (except for partial heating). life support applications these nec products are not intended for use in life support devices, appliances, or systems where the malfunction of these prod ucts can reasonably be expected to result in personal injury . the customers of cel using or selling these products for use in such applications do so at their own risk and agree to fully indemnify cel for all damages resulting from such improper use or sale. a business partner of nec compound semiconductor devices, ltd. 05/04/2005
11 4590 patrick henry drive santa clara, ca 95054-1817 telephone: (408 ) 9 19-250 0 facsimile : ( 40 8 ) 988-0279 subject: compliance with eu directives cel certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of european union (eu) directive 2002/95/ec restriction on use of hazardous substance s i n electrical and electronic equipment (rohs) and the requirements of eu directive 2003/11/ec restriction on penta and octa bde. cel pb-free products have the same base part number with a suffix added. the suffix Ca indicates that the device is pb-free. the Caz suffix is used to designate devices containing pb which are exempted from the requirement of rohs directive (*). in all cases the devices have pb-free terminals. all devices with these suffixes meet the requirements of the rohs directive. this status is based on cels understanding of the eu directives and knowledge of the materials that go into its products as of the date of disclosure of this information . restricted substanc e per rohs concentration limit per rohs (values are not yet fixed) concentration contained in cel devices -a -a z lead (p b) < 1000 ppm not detected (*) mercury < 1000 ppm not detected cadmiu m < 100 ppm not detected hexavalent chromiu m < 1000 ppm not detected pbb < 1000 ppm not detected pbde < 1000 ppm not detected if you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. important information and disclaimer: informatio n p rovided by ce l o n its website or in other communications concertin g the substan ce content of its products represents knowledge and belief as of the date that it is provided. cel bases its know ledge and belief on informatio n provided by thir d p arties and makes no representation or warrant y as to the accura cy of such information. efforts are underw ay to better integrate information from third parties. cel has taken and continues to take reasonable steps to provide representative and ac curate information but ma y not have conducted destructive testing or chemical analysis on incoming ma terials and chemicals. cel and ce l suppliers consider certain information to be propri etar y, and thus cas numbers and other limited information may not be availabl e for release . in no event shall cels liability arising out of such information exceed the total purchase price of the cel part(s) at issue s old by cel to customer on an annual basis. see cel terms and conditions for additional clarification of wa rranties and liabilit y.

▲Up To Search▲

Price & Availability of UPG2024TQ-E1-A

	To Download UPG2024TQ-E1-A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .